Zte Velocity USB Stick, User Manual, Page: 9 / 19

Advanced Settings
This chapter provides information on how to configure advanced
settings for the device, such as APN, firewall, SIM PIN, and more.
Note:
Disconnect the device from the network before changing
any settings (see Disconnect From the Internet on page 7).
Settings tabs:
• Network – Add a new APN or select one to use.
•
Firewall
– Configure MAC/IP/Port Filtering or DMZ settings.
• Advanced – Configure SIM PIN, view local time and time zone,
or reset the device.
Configure APN Details
The Access Point Name (APN) is checked to determine the
type of network connection to establish. Your device comes
preconfigured with the APN for AT&T.
Add an APN for Another Network
1. From the management web site, click Settings on the menu.
2. On the Network tab, next to Mode , click Manual .
3. Click
Add
.
4. Enter the profile name and APN (obtained from your carrier).
5. Select the PDP type: IPv4, IPv6, or IPv4/IPv6 (default).
6. Select the DNS mode. If set to Manual DNS, you will need to
enter the Primary DNS and (optionally) Secondary DNS.
7. Select the network authentication mode: NONE (default),
CHAP, or PAP.
8. Enter the user name and password.
9. Click
Save .
Select the APN Entry to Use
1. From the management web site, click Settings on the menu.
2. On the Network tab, next to Mode, click Manual .
3. From the drop-down box beside Profile Selection , select the
desired APN.
4. Click Set Default .
Advanced Settings Advanced Settings 15 14