Zte Unite II User Manual Download

Page: 5 / 38

ZTE Unite

II User Manual

Confidential and Proprietary Information of ZTE CORPORATION 1

Getting Started

Introduction

ZTE Unite

II is a

4G LTE™

mobile hotspot device, using a 4G LTE™ network. The client devices can

connect to ZTE Unite

II via Wi-Fi. The device supports data services, enabling you to communicate

anytime and anywhere.

Outline and Parts

The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.

1.Power Button

Press and hold the

Power

button to switch on/off the device.

2.Charger/USB port

Charge your device.

3.OK Key

Enter or select an item.

4.Left Key

Check the on-screen menu from right to left.

5.Right Key

Check the on-screen menu from left to right.

6.Back Key

Go back to the previous screen.

7. LCD Screen

It indicates the signal type, signal strength, battery, Wi-Fi, etc.

8.microSDHC card slot

It is where you insert the microSDHC card.

Indicators

When the device is powered on, the following icons will appear on the LCD screen, with the
corresponding indicators listed in the table below:

Summary of Contents for Unite II







































Search results

Summary of Contents for Unite II

Reviews:

Related manuals for Unite II

Brands by name

Popular brands

Zte Unite II, User Manual

Search results

Summary of Contents for Unite II

Reviews:

Related manuals for Unite II

Brands by name

Popular brands