Charge the Battery
1.
Plug the charger into the device’s microUSB
connector on the left side of the device near
the bottom.
2.
Plug the charger into an electrical outlet.
Turn on Your Device
•
Press and hold the the Power On/Off button for
three to four seconds. The LEDs will flash, and
when only the center LED is flashing, you are
connected to the Sprint network.
Note:
While your device is powering on, the LEDs
will flash several times, indicating your battery’s
charge level.
Get Your Device Ready _
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Peel
ZTE
Low battery
Fully-charged battery
Battery needs recharging
