Problem
Possible Causes
Possible Solution
Shortened
standby time
The standby time is related to your service
provider system configuration. The same
phone used with different service providers’
systems will not provide exactly the same
length of standby time.
If you are located in an area where
signaling is weak, temporarily power off
the phone.
The battery is depleted. In high temperature
environments, battery life will be shortened. Use a new battery.
If you are not able to connect to the
network, the phone will continue to send
out signals as it attempts to locate a base
station. Doing so consumes battery power
and will consequently shorten standby time.
Change your location to one where the
network is accessible, or temporarily turn
off your phone.
Cannot turn your
phone on
Battery power has been depleted.
Recharge the phone’s battery.
Unable to connect
to the network
You are not within the network’s service
area.
Check the service area with your service
provider.
You cannot make
outgoing calls.
Poor signal.
Move to an open space, or if you are inside
a building, move closer to a window.
You have activated the Fixed dial numbers
feature.
Go to Call settings to check the Fixed
Dialing Numbers and disable it.
You have activated the Call barring feature.
Upgrade the phone software.
PIN Code blocked
You have entered an incorrect PIN code
three consecutive times.
Contact your service provider.
Unable to enter
information into
the phonebook
The phonebook’s memory is already full.
Delete unnecessary data from the contacts.
Problem
Possible Causes
Possible Solution
Phone crashes,
reboots, freeze,
or cannot be
powered on
Some third-party software is not compatible
with your phone.
Reset the phone to factory status.
Cannot answer
incoming calls
You have activated the Call barring feature.
Enter safety mode and uninstall the
software that may cause the problem.
Troubleshooting
Troubleshooting
72
73
