Zte N790, User Manual

Page: 21 / 78

21
notifications.
Add a Wi-Fi Network
You can add a Wi-Fi network if the network does not broadcast its name (SSID), or to add a Wi-Fi network when
you are out of range. Get information about the network from the network administrator first.
1. Turn on Wi-Fi, if it’s not already on.
2. In the Wi-Fi settings screen, touch Add Wi-Fi network .
3. Enter the SSID (name) of the network. If the network is secured, touch the Security menu and then touch
the type of security deployed on the network.
4. Enter any required security credentials.
5. Touch Save . Any credentials that you entered are saved, so you are connected automatically every time
you come within range of this network.
Forget a Wi-Fi Network
1. Turn on Wi-Fi, if it’s not already on.
2. On the Wi-Fi settings screen, touch and hold the name of the network.
3. Touch Forget network in the dialog that opens.
Connecting to Bluetooth Devices
Turn Bluetooth on or off
1. Press the Home Key > Menu Key , and touch Settings to open the Settings application.
2. Touch Wireless & networks .
3. Check or uncheck Bluetooth to turn it on or off.
Change the Bluetooth Name
1. Press the Home Key > Menu Key , and touch Settings to open the Settings application.
2. Touch Wireless & networks > Bluetooth Settings .
3. If Bluetooth isn’t turned on, check Bluetooth to turn it on.
4. Touch Device name , enter a name, and touch OK .
Pair Your Phone with a Bluetooth Device
1. Press the Home Key > Menu Key , and touch Settings to open the Settings application.
2. Touch Wireless & networks > Bluetooth Settings .
3. If Bluetooth isn’t turned on, check Bluetooth to turn it on. Your phone scans for and displays the IDs of
all available Bluetooth devices in range.
4. If your phone stops scanning before you make the other device discoverable, touch Scan for devices .
5. Touch the ID of the other device in the list in Settings to pair them. The devices pair with each other. If
you’re prompted to enter a pass code, try entering 0000 or 1234 (the most common passcodes) , or check
the user guide that came with the device.