Installation continued…
Press ‘Finish’ to complete - The Connection manager launches and installs the drivers:
Telecom Connection Manager - Press Connect to get on line…
4.
When the installation is complete the Connection Manager will launch and continue
installing the drivers for a few minutes. After the device has finished initialising press
Connect to get on line.
LED status indication
5.
LED Indicator
Modem status
Red
Offline. Not registered on the network
Green solid
Registered on the 2G network (roaming)
Green blinking
Data active on the 2G network (roaming)
Blue solid
Registered on the 3G network
Blue blinking
Data active on the 3G network
Troubleshooting Tips
6.
In the event of installation or connection issues try the following suggestions:
Install and test the modem in another computer
1.
Check your SIM card is working in another device – eg mobile phone
2.
Insert a known working SIM card into your modem
3.
Confirm your account is active – contact your service provider
4.
Uninstall the modem and re-install using Windows ‘Safe Mode’ – consult a PC
5.
technician for help if required (PC only)
Advanced users can check Device Manager to make sure the drivers are installed
6.
correctly. The full software installation is available on our website www.zte.co.nz
Using the Modem as a Mass Storage Device
7.
You can insert a MicroSD
TM
memory card up to 8GB to use the modem as a mass storage
device.
Safely remove your modem from your computer.
y
Open the modem back cover to access the MicroSD
y
TM
slot.
There is a diagram showing the correct orientation of the MicroSD
y
TM
card printed on
the top of the MicroSD
TM
slot.
Check the correct orientation and carefully insert the MicroSD
y
TM
card.
Replace the modem cover and insert your device into your computer.
y
The MicroSD
y
TM
card will appear as an external drive on your computer system.
Always handle memory cards with care and avoid static discharge.
y
Safe removal of the modem from your computer
8.
Whenever you need to remove the modem from your computer please close the Connection
Manager and use Safely Remove Hardware or Eject for MAC OS.
If you remove the device while the Connection Manager is still active it is possible to corrupt
the local Phonebook file.
Uninstall the modem software
9.
Windows: Start > Programs > Telecom Connection Manager > Uninstall.
MAC OS X: Applications > Uninstall Telecom Connection Manager.
MF668新西兰折页.indd 2
2009-9-24 11:48:04
