Zte MF28D, Quick Start Manual, Page: 57 / 60

57
Getting to know your 4G router
(see illustrations on pages 4–5)
1
Light-emitting diodes (LEDs)
• Lit when the router is turned on
• Lit when the wireless transfer function is activated
• Indicates VOIP call (service not available in some countries)
• Flashes when data is being transfered via the Internet
• Lit when you are connected to the Internet
• States signal strength
2
WPS-button
After activating WPS (Wi-Fi Protected Setup) in your router’s setup management, you can connect
computers to the wireless network without a security key by pressing the WPS button.
3
USB port
4
Slot for SIM card
5
Port for telephone
(Ports are plugged and inactivated)
6
Port for incoming phone line
(when using the ZTE MF28D as a router for a fixed broadband connection)
7
Four network ports for computers, network printers and so on (LAN)
8
On/off switch
9
Socket for power cable
10
Reset button, to restore factory settings
11
Sockets for external antennas, the connector is SMA
12
Button for activating external antennas