MF23 User Manual
18 Confidential and Proprietary Information of ZTE CORPORATION
•
TX Power
: Transmit power should be remained as the value of 100.
•
Short Preamble
: The length of CRC block in the frames during the wireless communication.
•
Shot Slot
: To indicate that 802.11g is using a shot time slot because there is no legacy station(802.11b)
present.
•
Tx Burst
: Tx burst allows router to deliver better throughput in the same period and environment in
order to increase speed.
•
Pkt_Aggregate
: Increase efficiency by aggregating multiple application packets data into a single
transmission frame. In this way, 802.11n networks can send multiple data packets with the fixed
overhead cost in just a single frame.
•
IEEE 802.11H Support
: Support IEEE 802.11H or not.
The Wi-Fi multimedia parameters are shown below:
•
WMM Capable
: When multimedia contents are transferred over wireless network, this function
enhances data transfer performance.
•
APSD Capable
: Automatic Power Save Delivery (APSD),enable or disable data flow using APSD
during transmitting for power saving.
Click
Apply
to confirm your configuration.
Security
Select
Wi-Fi Setting > Security
, the Security parametersare shown in thefollowing figure:
Unless one of these encryption modes is selected, wireless transmissions to and from your wireless
network can be easily intercepted and interpreted by unauthorized users.
The security modes are described below:
•
Open
: You can authenticate successfully with a SSID, whether it is valid or empty.
•
Shared
: The WLAN clients who have the same WEP key with wireless gateway can pass the
authentication and access the wireless network.
•
WEPAUTO
: Select WEP security automatically.
•
WPA-PSK
: WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII) pass-phrase of at
least 8 characters.
•
WPA2-PSK
: It is the securer version of WPA with implementation of the 802.11i standard.
•
WPA-PSK/WPA2-PSK
: Apply both the WPA-PSK and WPA2-PSK scheme.
If the Authentication type is
Open
,
Shared
,
WEPAUTO,
the bottom part of the configuration page
displays parameters as shown.
•
WEP Keys
: At most four keys can be set in the blank. Choose the primary key index. The primary key is
