Zte M Z-01K, Instruction Manual

Page: 41 / 158

Before Using the Terminal
39
: Error/Alert messages
: Authentication of d ACCOUNT setting failed
→ P.101
: Hidden notifications
■ Main status icons
(Strong)
⇔
(Week) (4 levels) : Signal status
*1
･
Status indicator of the icon changes according to the signal level.
: Out of service area
: During international roaming
/
/ : 4G (LTE)/3G/GSM available
: Airplane mode is set
→
P.91
(4 levels) : Wi-Fi connected
*1
→
P.89
: Connected to Wi-Fi that Internet access is unavailable
: Bluetooth is ON
→
P.113
: Bluetooth device is connected
→
P.113
: Speaker phone is ON
→
P.55
: Microphone is muted
→
P.54
: Silent mode (Vibrate)
→
P.97
: Silent mode (Silent)
→
P.97/"Do not disturb
*2
" is set to "Alarms
only" or "Priority only"
･
Displayed even when dialing/calling (except when "Do not
disturb
*2
" is set to "Total silence"). Alarm sound etc. does not
sound when dialing/calling.
: "Do not disturb
*2
" is set to "Total silence"
: GPS positioning
→
P.81
(High)
⇔
(Low) : Battery level
･
Remaining level display of the icon changes according to the
battery level.
: Battery level 6 - 15
％
: Battery level 5% or less
: Charging
→
P.28
: VPN connection
→
P.93
: docomo nano UIM card is not inserted
: Kana input mode → P.34
: Alphabet input mode → P.34
: Number input mode → P.34
*1 During data communication, appears at the side of Wi-Fi or
cellular data icon in the quick setting panel. → P.41
*2 You can set from "Do not disturb" in the quick setting panel. →
P.41
Notification panel
Flick the status bar downward to open the Notification panel. In the
Notification panel, you can check information of notification icon or
make settings.
1
Flick the status bar downward
a
Settings
･
Display the Settings menu. → P.88
d
c
e
a b