7 Configure the Management and Diagnosis
Table 7-8 Ping Diagnosis Parameter Descriptions
Parameter
Description
IP Address or Host Name
Destination IP address or host name.
Egress
Data direction. If you want to detect the connection with an external
address, select a WAN connection.
4. Click
Diagnosis
to diagnose the connection. The system pings the specified ad-
dress. The system performs ping operations for four times by default, and the opera-
tion results are displayed in the bottom box.
Trace Route Diagnosis
1. Click to open
Trace Route Diagnosis
Figure 7-15 Trace Route Diagnosis Page
2. Set the parameters. For the description of the parameters, refer to
.
Table 7-9 Parameter Descriptions for Trace Route Diagnosis
Parameter
Description
IP Address /Host
Name
Destination IP address or host name for the Trace Route operation.
Egress
To detect the connection with an external address, select a WAN connection.
Maximum Hops
Maximum number of hops that the Trace Route packets require for arriving at
the destination, default: 30.
SJ-20210621164956-009 | 2021-12-07(R1.0)
87
Summary of Contents for H3140
Page 6: ...IV ...
