Zte H3140 Maintenance Management Manual Download

Page: 73 / 97

6 Configure the VoIP

6.2 Configure the SIP Accounts

Abstract

This procedure describes how to configure basic parameters of the VoIP service, includ-
ing sip account, authorization username, password.

Steps

1. On the main page of the H3140, select

VoIP > Basic

. The

SIP Account-1

page is

displayed, see

Figure 6-2

Figure 6-2 SIP Account-1 Page

2. Set the parameters. For a description of the parameters, refer to

Table 6-1

Table 6-1 Parameter Descriptions for the SIP Account-1

Parameter

Description

Enable

Specifies whether to enable the VoIP service.

SIP Account

Registered name of a SIP subscriber. Normally, it is the phone number of the
subscriber.

Authorization
Username

Username for authentication by the SS system, which must be the same as
that configured in the SS system.

Password

Password for VoIP service authentication by the SS system, which must be
the same as that configured in the SS system.

3. Click

Apply

button to apply the changes.

Note

SIP Account-2 configuration refers to SIP Account-1 configuration.

SJ-20210621164956-009 | 2021-12-07(R1.0)

Summary of Contents for H3140


































































































Search results

Summary of Contents for H3140

Reviews:

Related manuals for H3140

Brands by name

Popular brands

Zte H3140, Maintenance Management Manual

Search results

Summary of Contents for H3140

Reviews:

Related manuals for H3140

Brands by name

Popular brands