Zte H3140 Maintenance Management Manual Download

Page: 23 / 97

4 Configure the Internet

4.1.2 Check the 3G Status

Abstract

The section describes how to check the mobile network and 3G connection status.

Steps

Check Mobile Network

1. On the main page of the H3140, select

Internet > WAN Status > 3G > Mobile Net-

work

to the

Mobile Network

page. The signal strength can verify the network card is

plugged, see

Figure 4-3

Figure 4-3 Mobile Network

2. Click

Refresh

to refresh the information.

Check 3G Connection Status

3. On the main page of the H3140, select

Internet > WAN Status > 3G > 3G Connec-

tion Status

to the

3G Connection Status

page, see

Figure 4-4

Figure 4-4 3G Connection Status

4. Click

Refresh

to refresh the information.

4.2 Configure the WAN

4.2.1 Configure the Ethernet Connection

Abstract

This procedure describes how to configure a broadband connection (WAN connection)
on the network side of the device, so that services (including data and videos) of users
can be connected to the external network through routing or bridging.

SJ-20210621164956-009 | 2021-12-07(R1.0)

Summary of Contents for H3140


































































































Search results

Summary of Contents for H3140

Reviews:

Related manuals for H3140

Brands by name

Popular brands

Zte H3140, Maintenance Management Manual

Search results

Summary of Contents for H3140

Reviews:

Related manuals for H3140

Brands by name

Popular brands