Zte H298N, Maintenance Manual

Page: 105 / 133

Table 47 Queue Management Parameters
Parameter Description
Interface Indicates the interface to which the queue management
function applies: WAN, LAN1, LAN2, LAN3, or LAN4.
Priority Indicates the processing priority in the range of 1-4.
The queue with the greatest priority value will be used as
the default queue in device configuration queue rules.
Algorithm Indicates the queue algorithm, which is SP by default.
Weight When DWRR is selected for Algorithm , enter the weight
in the text box. Algorithm doesn't work until the sum of
queues' weight comes to 100%.
3. Click Add .
QoS management is configured.
Postrequisite
You can also modify or delete the QoS rules, as listed in Table 48 .
Table 48 Queue Management Operations
Button Description
To modify the rules of a queue
To delete the rules of a queue
6.8.4 Committed Access Rate
Context
To configure the QoS committed access rate, perform the following steps:
Steps
1. Choose [ Application→ QoS→ Committed Access Rate ].
2. Configure the access rate parameters, as shown in Figure 75 .
105