Zte H298N Maintenance Manual Download Page 125

Page: 125 / 133

7.3.2 Software Upgrade

Prerequisite

Before this operation, make sure that the upgrade file is ready.

Context

To upgrade the software, perform the following steps:

Steps

Choose [

Administration→ System Management→ Software Upgrade

], as shown in

Figure

Figure 91 Software Upgrade

Click

Browse

to select the upgrade version file.

Click

Upgrade

Note:

The system prompts the upgrade progress. During the upgrade process, do not cut off the power

supply. Otherwise, the device may be damaged.

After the software is upgraded, the system is automatically restarted and returns to the login dialog

box.

7.3.3 User Configuration Management

Perform this procedure to import and export the user configuration file.

125

Summary of Contents for H298N






































































































































Search results

Summary of Contents for H298N

Reviews:

Related manuals for H298N

Brands by name

Popular brands

Zte H298N, Maintenance Manual

Search results

Summary of Contents for H298N

Reviews:

Related manuals for H298N

Brands by name

Popular brands