CDMA2000 1X EV-DO Wireless Data Terminal User Guide
ZTE Corporation
7
http
:
//www
.
zte
.
com
.
cn
Receive a call
When there is an incoming call, your computer will alert and the incoming caller ID will
appear on the interface.
Click
button in the right side of the interface or press “Enter” to receive the call.
Press
button or press “Esc” to reject the call.
Redial the latest outgoing call
Click
button in the right side of the interface.
Call Waiting
During a call, you could select to answer the second incoming call, and then you could switch
between the two incoming calls.
Please firstly apply for this service from your local telecom operator.
During a call, if there is a new incoming call; a pop-up window will prompt you that
you have the second incoming call.
If you select to answer, please click “Accept waiting call” button. The previous call
won‟t be ended, but temporarily paused.
You could switch between two incoming calls by clicking “Switch call”.
Three-way Call
This function allows for the call among three parties. Please firstly apply for this service from
your local telecom operator.
Note:
You need set “Show 3 way call button during calling”. Please perform the setting
according to “Setting”.
You could click “Dial second call” button during a call, input the third-party number in
the pop-up window, and then press “OK” button to call the third party. In this case, the
original call won‟t be ended, but temporarily paused.
If the third party answers the call, click “Start conference” to enter the conference call.
During three-way conference call, click “Hangup second call” button to end the
conference call, and return to the original call.
9. Call History
(If this feature is not supported by your Data Terminal, please skip over this chapter.)
Summary of Contents for CDMA20001X EV-DO
Page 3: ......