Zte C350 User Manual Download

Page: 24 / 72

2.3 Technical Parameters

Handset

Type

ZTE C350

Dimensions

（

Width×Height×Thickness

）

46mm×90mm×16mm

Weight

About 75g(Battery Included)

Battery

Continuous standby
time

About 80h

～

160h (Subject to Network)

Continuous talk time

About 2h

～

4h (Subject to Network)

Note

: Please refer to the real phone for other relative parameters

of the battery and charger.

2.4 Battery

The attached Li-ion battery along with the phone can be used after

unpacking. For the first three times, please use up the power and

charge it fully for a new battery to perform well.

2.4.1 Remove and Installation of Battery

Remove

：

(1) Press and push the back-cover of the phone down to

release and remove it off the phone. (2) Put finger on the side

finger grips, and then lift up the battery from the finger grips to

remove the battery.

Summary of Contents for C350









































































Search results

Summary of Contents for C350

Reviews:

Related manuals for C350

Brands by name

Popular brands

Zte C350, User Manual

Search results

Summary of Contents for C350

Reviews:

Related manuals for C350

Brands by name

Popular brands