manualshive.com logo in svg

Zte C220, User Manual

Share
Download
Zte C220 User Manual Download Page 58

ZTE    

                             

Confidential

 

 

51

damage the phone, or result in violation of regulations. Do not use the 
phone with a damaged antenna. If a damaged antenna comes into 
contact with the skin, a minor burn may result. Please contact your 
local dealer for replacement antenna. 
 
  

FCC Part 15 Notice 

This device complies with part 15 of the FCC Rules. Operation is 

subject to the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.     
 

Warning

: This device has been tested and found to comply with 

the limits for a Class B digital device pursuant to Part 15 of the Federal 
Communications Commissions Rules and Regulations. These limits 
are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will 
not occur in a particular installation.   

If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try and correct the 
interference by one or more of the following measures:   
. Relocate this device   
. Increase the separation between the device and the receiver   
. Connect the device into an outlet on a circuit different from that of 

Summary of Contents for C220




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands