In particular, you need to know the port numbers and the
protocol (TCP, UDP) used by outgoing traffic.
•
Dropped
— Internet traffic is blocked by default. Only traffic
from the selected pre-defined or custom applications are
allowed to access the Internet.
Click
Apply
.
Enable VPN Passthrough
If you want to connect to a corporate network using VPN, you
first need to enable VPN connections (passthrough).
To enable VPN passthrough:
On the AT&T Wi-Fi Manager home page, log in as
Administrator.
Click
Settings
on the navigation menu on the left side.
Click
Advanced
>
Router
tab.
In the VPN Passthrough section, select
Enable
beside VPN
Passthrough, and click
Apply
.
Configure APN Details
The APN is checked to determine the type of network
connection to establish. Your mobile hotspot comes
preconfigured with the APN (Access Point Name) for AT&T.
To add an APN for another network:
On the AT&T Wi-Fi Manager home page, log in as
Administrator.
47
Advanced Settings
Advanced Settings
46
Click
Settings
on the navigation menu on the left side.
Click
Network
>
APN
tab.
Click
Add
.
Enter the profile name and APN (obtained from your carrier).
Select the network Authentication mode. The options are:
•
NONE (default)
•
CHAP
•
PAP
Enter the User Name and Password, if these are required for
the wireless network.
Click
Save
.
To select the APN entry to use:
From the drop-down box beside Profile Selection, select the
desired APN to use.
To remove an APN entry:
Select the APN you want to remove, and click
Delete
.
Enable DMZ
In a DMZ (demilitarized zone) network configuration, a
computer runs outside the firewall in the DMZ. This computer
intercepts incoming Internet traffic, providing an extra layer of
protection for the rest of the network.
AT&T Velocity – User Guide – Postpaid
AT&T Velocity – User Guide – Postpaid
