28
options and press the
OK Key
:
More Sensitive
: The voice commands system will increase the sensitivity and displays
more potential matches.
Recommended
: The voice commands system will control the sensitivity automatically.
Less Sensitive
: The voice commands system will decrease the sensitivity to filter out
more potential matches. If you are frequently asked to try again, select
More Sensitive
.
Adaptation
Adaptation is the process of optimizing the voice recognition software to your voice.
Adaptation requires recording your voice, which is then used to customize the voice
recognition system.
1. Select
Adapt Voice
or
Reset Voice
and press the
OK Key
.
Adapt Voice:
Requires that you make recordings of your voice to customize the voice
recognitions system. It will take a few minutes.
Reset Voice:
Once you finish the adaptation process, you can reset the adaptation to the
factory default settings. The
Reset Voice
menu option only appears after you finish the
Adapt Voice
process.
2. Press the
OK Key
to begin.
3. Wait for the beep and then repeat the sentences using a normal tone of voice.
4. When you are finished with a full session, you will reach a screen that reads
Adaptation
Complete
.
Note:
Adaptation will take a few minutes, and you should be in a quiet environment.
Prompts
Select
Mode
or
Audio playback
and press the
OK Key
.
Mode:
Select the Voice Commands system mode from the following:
Prompts:
Read out Voice Commands prompts.
Read Out + Alerts:
Read out and Alert tone prompts, dialing digits and menus at the
same time.
Read Out:
Read out prompts, dialing digits and menus.
Tones Only:
Prompts you with a tone only.
Audio playback:
Allows audio playback to play through the speakerphone or through the
earpiece. Select
Speakerphone
or
Earpiece
and press the
OK Key
.
Timeout:
Allows you to control how long the system listens for a command before timing
out.
About
Check the information about Voice Commands system.
Calculator
Your mobile phone has a built-in calculator capable of performing simple mathematical
calculations.
1. Press the
OK Key [MENU] >
Settings & Tools > Tools
> Calculator
.
2. Enter a number with the keypad.
3. If necessary, press the
Right Soft Key [Operators]
to insert
(
,
)
, or
Exponent
.
4. Press the
Directional Key
to select a mathematical function (add, subtract, multiply or
divide).
5. Enter the next number with the keypad.
6. Press the
OK Key
to view the result. Press the
Left Soft Key [Clear]
to clear the inputs or
result.
Note:
Press the
* Key
to insert a decimal. Press the
# Key
to change the sign of a number to
negative.
