Technical Parameters
Handset
Type
ZTE
A36+
Dimensions
(
L
×
W
×
H
)
107.6mm x 47mm x 13.8mm
Weight
Approx.
48 g
(without battery)
Battery
Continuous standby time
Approx. 90 hours ~ 130 hours (subject to network status)
Continuous talk time
Approx. 2 hours ~ 4 hours (subject to network status)
For other parameters about battery and charger, refer to their labels.
Battery
The accessory
lithium battery of the handset can be immediately used after unpacking. A new battery performs
best after full charge/discharge cycles for the first three times.
Removing & Installing the Battery
Remove: Power off your phone, slide down the cover and then lift the battery from the compartment to remove
it.
Install: Place the bottom of the battery into position, push down on the upper section of the battery until it clicks
into place and then install battery cover.
Charging the Battery
9