background image

10

1.6 W/kg.

This device is complied with SAR for general
population/uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and had been tested in accordance with the
measurement methods and procedures specified in
IEEE1528.

The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC ID:
SRQ-ZTEA2022L. The FCC ID also can be found on the
device when you open

Settings > About phone > FCC

ID

.

For this device, the highest reported SAR value for usage
against the head is 0.41 W/kg, and for usage near the
body is 0.88 W/kg.

While there may be differences between the SAR levels
of various phones and at various positions, they all meet
the government requirements.

SAR compliance for body-worn operation is based on a
separation distance of 10 mm between the unit and the
human body. Carry this device at least 10 mm away from
your body to ensure RF exposure level compliant or
lower to the reported level. To support body-worn
operation, choose the belt clips or holsters, which do not
contain metallic components, to maintain a separation
of 10 mm between this device and your body.

RF exposure compliance with any body-worn accessory,
which contains metal, was not tested and certified, and
using such body-worn accessory should be avoided.

FCC Regulations

This device complies with part 15 of the FCC Rules.

Summary of Contents for A2022L













Reviews: