ZTE-J G682, User Manual

Page: 49 / 81

ZTE-J G682 Digital Trunking Phone
49
Call Attribute
After
“
Call Attribute
”
is set, the PTT call made by the phone will be
Ordinary PTT call or Pre-emptive Priority PTT call, and the
corresponding icon will display in the status bar of the standby screen.
Setting Method
1. Press PTT Functions to select Call Attribute ;
2. Press

/

key to select Normal or Pre-emptive ;
3. Press Save .
Note
Please refer to section “Quickly Change Call
Attribute in Idle Mode” for details on call attribute
setting shortcut.
Private Call Forwarding
After “
Private Call Fwd
.” is activated, you
could forward all incoming PTT
private calls to the number you set. You could perform the corresponding
settings in the phone.
Note
The forwarding number you set must be a PTT call
number.
Setting Method
1. Press PTT Functions to select Supplement Svc , and then select
Private Call Fwd. ;
2. Press
▲
/
▼
key to select All Calls , Busy , or Off-Service ;
3. Press Select to enter, and press
▲
/
▼
key to select On , or Off ; if you
select On , then you need to enter a forward number;