Test for Continuity
1.Press
button three times to enter in continuity
range.
2. Use the probe pin to contact two sides of the
circuit.
3. The built-in beeper will beep when the resistance
is lower than 50Ω, which indicates a short circuit.
Test Diodes
1.
Press twice to enter in diode range.
2.
Contact the read pin with the positive pole and
the black lead pin with the negative pole of the
diode.
3.
Read the forward bias voltage value on the
display.
8
• Disconnect circuit power and discharge all
capacitors before you test resistance.
• Do not input voltage at this setting.
*Do not input voltage at this setting.
Summary of Contents for ZT-922
Page 23: ......
