Quick Start Guide
16
LAN mode
: Connect RJ-45 Ethernet cable from the LAN port to the router.
WIFI mode
: Step1. Complete WIFI connection setting, see
for the detail.
Step2. Make sure that WIFI Antenna is connect to encoder, device will connect to the WIFI
automatically.
Built-in 4G
: Plug SIM card and connect antenna to encoder, device will connect to 4G net automatically.
External 4G
: Plug USB 4G Dongle into the encoder, device will connect to 4G net automatically.
Step6. Please refer to
Chapter3 Encoder Web Control User Interface
Step7. Press
to push video go live.
NOTE:
SIM don’t support hot-plugging, so turn off the unit before plug.
When WIFI connection setting is complete, don’t need to set up again unless users want to
connect to another WIFI.
2.6 WIFI connection setting
Step1. Connect WIFI Antenna to encoder.
Step2. Connect RJ-45 Ethernet cable into encoder from the LAN port to an internet connected router.
Step3. Enter the IP address on the LCD screen into the address bar of the web browser.
Step4. By the means of “network setting”, encoder will connect to WIFI. See
Step5. (Optional)Pull Ethernet cable from the LAN port of encoder.
