ZOWEETEK ORIGINAL SOUND
Voice Amplifier
USER MANUAL
ZW-H6
Shenzhen Zoweetek Electronics Limited www.zoweetek.cn
Shenzhen Zoweetek Electronics Limited www.zoweetek.cn
Shenzhen Zoweetek Electronics Limited www.zoweetek.cn
Shenzhen Zoweetek Electronics Limited www.zoweetek.cn
Shenzhen Zoweetek Electronics Limited www.zoweetek.cn
A.
When working, the battery icon on the screen flash continuously,
indicating that the battery is low,please charge it in time. Please use
About Speaker Charging:
MIC VOL
MIC
TF
DC 5V
USB
Detachable
head-mounted rack
UHF Wireless Microphone:
soft rubber circle
head-mounted design
Head bracket
Pairing key
battery
charging sign
volume -
Power switch
ON/OFF
Microphone head
DC 5V
Step 1:
Turn on the speaker, fast and short press “ M ” 3 times
to enter into UHF wireless pairing status with voice prompt
“ UHF is waiting for connection ”.
Step 2:
Switch on the UHF wireless MIC and long press “ ” for 5s,
pairing is successful with voice prompt “UHF is connected”.
Then you can amplify voice with wireless MIC.
Note:
During the use of wireless microphone,short press “+” to
increase the microphone volume and short press “ - ” to
reduce the microphone volume.Long press “ ” to disconnect
wireless microphone with voice prompt “UHF is disconnected ”,
repeat step 1 and step 2 to pair wireless microphone manually.
UHF Wireless Microphone Operation:
When the blue light blinks, it means the battery in the headset is low,
Please push the switch to “ OFF ” state to close the microphone,
connect one end of Micro USB connector to the DC 5V interface of
the microphone, and connect the other end to the charger to the
power socket. When charging, the red light will on all the time; it
will go out when the battery is fully charged. Unplug the charger as
soon as it is charged.
100% Zoweetek Guaranteed Product Satisfaction.
We provide operation guidance and render a 1 year warranty.
If you have any questions, please feel free to contact us.
We will try our best to provide you the best service.
Official website: www.zoweetek.cn
Email:[email protected]
About UHF Wireless Microphone Charging:
the standard adapter.Please unplug the adapter timely after
fully charged the charging time is normally 4-5 hours.When
charging, the screen battery icon will flash continuously. When
fully charged, the battery icon will stop flashing and remain in
the long light state.
B.
In order to achieve the best effect when using the speaker for
the first time, it is recommended to be fully charged before use.
C.
Please use the standard 5V 2A charger to charge the device.
Wireless Microphone Technical Parameters:
Frequency response:
Working time:
Sensitivity:
30Hz-23KHz
-41dB±1dB
（
0dB=1V/Pa
）
3-5hours
Output resistance:
Recharging voltage:
Charging time:
≤2.2KΩ
DC 5V 500mA+
2-3 hours
Caution And Trouble Shooting:
Solve some normal problems by yourself:
1). Aim at the MIC capsule when speaking and keep the distance
between voice amplifier and MIC longer than 60cm avoid howling.
2). No sound out from the speaker after the UHF Mic is paired. The
connection between Mic and speaker may be lost. You should
re-pair it as mentioned in the previous paragraph.
3). Don’t insert or plug the connector frequently to avoid the looseness
of socket or the bad connect.
4). Recharge timely when battery power is low.
5). Original accessories are suggested if they need to be replaced.
6). Non-professional technician is not allowed to dismantle or repair
the product, please contact the local agent if there is any question
or service requirement.
7).The amplifier should be kept in dry and ventilated area, rain,water,
thump should be avoided.
8).Please keep the product and accessories far away from children.
9).This product needs to user the power adapter (DC 5V, 2A) to
charge. After charged, please remember to unplug the power cord
or power socket. We suggest stop other operations under the
charging mode. Please cut off the power supply first if you need
to use it.
10).If you don’t need to use it, please switch off the speaker to avoid
the loss of power.
Zoweetek Guarantee:
3.Haven’t turned on the
volume
Please adjust the volume
properly.
Please turn down the
volume.
Please use another better
audio files.
Please recharge it to
switch on.
2.The speaker is broken
Please contact us for
maintenance.
4.The UHF wireless is
disconnected or wireless
MIC is low battery
3.Haven’t turned on the
MIC volume
2.Haven’t switched on the
MIC
1.Haven’t inserted the wired
MIC properly
Please pair the UHF wireless
microphone again.Please
recharge wireless MIC.
Please turn on the MIC
volume.
Please turn on the
MIC properly.
Please insert the MIC.
3.Haven’t inserted the USB
flash drive/TF card properly
2.Chaotic procedure with
wrong
1.The audio’s format in USB
flash drive or TF card is wrong
Please insert the USB/TF
card properly.
Please restart the speaker.
Please turn the format to
MP3.
Please check whether the
distance beyond the effective
range of 33 ft.
Clear any barriers between
your device and speaker.
May exceed the distance
range or too many obstacles
Switch on the
speaker but no
sound
With sound
distortion
No sound with
Karaoke
No sound with
MP3 playing
The music is
staccato when
playing
1. Main machine is running
out of battery
2.No audio input
1.The volume is too high
