•
Keep fingers behind the finger guards on the
probes.
•
When the product has already been connected
to the line being measured, do NOT touch the
input terminal that is not in service.
•
Disconnect the test leads from the circuit before
changing the mode.
•
When the voltage to be measured exceeds 36V
DC or 25V AC, the operator shall be careful
enough to avoid electric shock.
•
Misuse of mode or range can lead to hazards,
be cautious.
“
”
will be shown on the display
when the input is out of range.
•
Low level of a battery will result in incorrect
readings. Change the batteries when battery
level is low. Do not make measurements when
the battery door is not properly placed.
2
