Zotac Supreme H67ITX series, User Manual

Page: 12 / 54

11
Installing the CPU Fan
There are many different fan types that can be used with this motherboard. Follow the instruction
that came with your fan assembly. Be sure that the fan orientation is correct for your chassis type
and your fan assembly.
Installing Memory Modules
Your new motherboard has two 1.5V 204-pin slots for SO-DIMM DDR3 memory. These slots
support 1 GB/2 GB/4 GB/8 GB DDR3 devices. There must be at least one memory bank
populated to ensure normal operation. Refer to the following recommendations to install memory
modules.
Note that a memory module has a notch, so it can only fit in one direction. Refer to the following
procedure to install memory modules into the slots on the motherboard.
1. Unlock a SO-DIMM slot by pressing the module clips outward.
2. Align the memory module to the SO-DIMM slot, and insert the module vertically into the
slot. The plastic clips at both sides of the slot automatically lock the SO-DIMM into the
connector.
115XLM
REMOVE
1.5V 1.5V
DDR3_1
DDR3_2
Hardware Installation