flasH update procedure
The program AWDFLASH.EXE is included on the driver CD (D:\Utility\
AWDFLASH.EXE). Please follow the recommended procedure to update the
flash BIOS, as listed below.
1. Create a DOS-bootable floppy diskette. Copy the new BIOS file (just obtained
or downloaded) and the utility program AWDFLASH.EXE to the diskette.
2. Allow the PC system to boot from the DOS diskette.
3. At the DOS prompt, type
awdflasH
<ENTER>
4. Enter the file name of the new BIOS.
5. The question: “Do you want to save BIOS (Y/N)?” is displayed.
press “N” if there is no need to save the existing biOs.
press “y” if a backup copy of the existing biOs is needed.
(A file name has to be assigned to the existing BIOS binary
file.)
6. The message : “Press “Y” to program or “N” to exit” is displayed. Type
“y”
<ENTER>
7. Wait until the flash-update is completed.
8. Restart the PC.
warning :
- Do not turn off or RESET the computer during the flash
process.
- If you are not sure how to upgrade the BIOS, please take
your computer to an Authorized Service Center and have
a trained technician do the work for you.
Summary of Contents for nForce 630i
Page 50: ...50 Technical Reference Booklet ...
Page 51: ...51 ...
