21
Configuring the BIOS
q
P-State Level
This item allows you to set P-State level.
q
C1E Support
This item allows you to enable or disable C1E function.
SATA Configuration
The items in this menu allow you to set or change the configurations for the SATA
devices installed in the system. Press <Enter> to display the configuration options:
q
OnChip SATA Type
Use this item to configure the SATA type.
q
SATA IDE Combined Mode
This item allows you to enable or disable SATA IDE Combined mode.
q
HD Detect Time Out (Sec)
This item allows you to set the HD detect time out.
USB Configuration
The items in this menu allow you to change the USB-related features. Press <enter>
To display the configuration options:
q
Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
q
USB 2.0 Controller Mode
Allows you to configure the USB 2.0 controller in HiSpeed or Full Speed .
q
BIOS EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-off
feature.
q
Legacy USB1.1 HC Support
Allows you to enable or disable Legacy USB1.1 HC support.
q
USB Mass Storage Device Configuration
Allows you to configure USB Mass Storage Device.
Power Management
The items in this menu allow you to control the system power management. Press
<Enter> to display the configuration options:
q
ACPI Version Features
Enable RSDP pointers to 64-bit Fixed System Description Tables. Di ACPI version
has some.
q
Suspend mode
This item allows you to set the ACPI state used for System Suspend.
q
Repost Video on S3 Resume
This item allows you to enable or disable Repost Video on S3 Resume function.
The default setting is [No].
q
Restore on AC Power Loss
This item allows you to configure how the system board responds to a power
failure.
q
Wake on lan
This item allows you to enable or disable Wake on lan function.
