Zotac ION series, User Manual

Page: 23 / 50

22
IONITX Synergy Series Motherboard
Security Menu
The security menu items allow you to change the system security settings. Press
<enter> to display the configuration options:
Change Supervisor/User Password
Select this item to set or change the supervisor/user password. The Supervisor/user
Password item on top of the screen shows the default not installed. After you set a
password , this item shows installed.
To set a Supervisor/user Password:
1. Select the change supervisor/user password item and press <Enter>.
2. From the password box, type a password compose of at least six letters and/or
number, the press <Enter>.
3. Confirm the password when prompted:
The message “Password installed” appears after you successfully set your
password.
To change the supervisor/user password, follow the same steps as in setting a use
password.
To clear the supervisor/user password, select the change supervisor/user password
then press <enter>. The message “password uninstalled” appears.
Boot Sector Virus Protection
The items allow you to enable or disable booting sector virus protection.
q
Hit ‘DEL’ Message Display
When set to [Enabled], the system displays the message “press DEL to run setup”
during POST.
q
Interrupt 19 Capture
When set to [Enabled], this function allows the option ROMS to trap interrupt 19.
Boot Device Priority
The items allow you to specify the boot device priority sequence.
Hard Disk Drivers
This option allows you to specify the boot device from hard disk drivers.