45
SATA RAID User Manual
6. Press F7 after selecting the target hard disks. A message which says “Clear disk
data?” will appear. If you are sure to clear the data in the selected hard drives,
press Y. (If the hard drives contain previously created RAID array, you need to
press Y to clear the data from the hard drives.)
7. After that, then Array List screen displaying the RAID array you created will appear.
If you want to set the disk array as boot device, use the UP or DOWN ARROW
key to select the array and press B. The Boot section will show Yes.
8. To read more information about the RAID array, press ENTER to enter the Array
Detail screen, where you should see detailed information about RAID mode, disk
block size, disk model name, and disk capacity, etc.
9. To delete the array, press D in the Array Detail screen. When the “Delete this
array?” message appears, press Y to confirm or N to cancel. Press ENTER to
return to the Array List screen. To exit the Nvidia RAID utility, press ESC in the
main menu or Ctrl+X in the Array List screen. Now, you can proceed to install the
SATA controller driver and operating system.
