Zotac G43-ITX series, User Manual

Page: 12 / 54

11
Hardware Installation
Installing the CPU Fan
There are many different fan types that can be used with this motherboard. Follow the instruction
that came with your fan assembly. Be sure that the fan orientation is correct for your chassis type
and your fan assembly.
Installing Memory Modules
This motherboard accommodates two memory modules. It can support two 240-pin DDR3
1333/1066/800. The total memory capacity is 8 GB. You must install at least one module in any
of the two slots. Refer to the following recommendations to install the memory modules.
q
One DIMM : Install it into slot 1 or 2. You can install the DIMM into any slot, however, slot 1
is preferred.
q
Two DIMMs
: Install them into slot 1 and slot 2
Note that a memory module has a notch, so it can only fit in one direction. Refer to the following
procedure to install memory modules into the slots on the motherboard.
1. Unlock a DIMM slot by pressing the module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically into the DIMM
slot. The plastic clips at both sides of the DIMM slot automatically lock the DIMM into the
connector.
12 0 24 0
12 1
12 0 24 0
12 1
1
.5
V
1
.5
V
DDRIII1
DDRIII2