20
AMD A75MATX series motherboard
Creating AMD Dual Graphics System
AMD Dual Graphics technology is based on the combination of AMD Accelerated
Processor (APU) and the discrete graphics card with advanced 3D performance.
Please follow the instructions below to create AMD Dual Graphics:
A. System
v
AMD APU series processor with graphics core
v
Windows 7
v
The motherboard and drivers which support AMD Dual Graphics
v
Radeon HD 6000 series graphics card which supports AMD Dual Graphics
(please refer to
http://www.amd.com
for more information)
B. Installing the Graphics Card and Setting the BIOS
Step 1:
v
Install the discrete graphics card into the PCI Express x16 slot on the
motherboard;
v
Connect the LCD cable to the DVI or VGA port, and start the system.
Step 2:
Enter the BIOS setting page: [Chipset] > [Display Configuration]:
v
Set the item [Surround View] to [Enabled];
v
Set the item [IGD Share Memory Setting] to [512 MB] or [1024 MB];
v
Save Changes and Exit;
v
Power off.
Step 3:
Remove the LCD cable from the DVI/VGA port, and connect it to the onboard graphics
socket of the motherboard. Reboot.
C. Configuring the Graphics Driver
Enter
AMD VISION Engine Control Center
, browse to
Performance\AMD
CrossFire
TM
and ensure the
Enable CrossFire
TM
check box is selected.
Note: Please be sure that the graphics card driver has been installed before
configuring the graphics driver.
