03
5. Operation
5.1 Read measurement data
5.2 View measurement data
4.2 Via SD card
This function is available on the older ZFG models with WLan SD card and can be switched on or off
via the menu of the electronics.
Press the <Mode> key to enter the menu. Scroll to "Read card" using the <Mode> key. Open the menu
sub-item by pressing the <OK> key. The device will now span its WIFI/WLan network. If you exit the
menu item with the <ON/OFF> key, the WIFI/WLan network is also closed again.
Now select the WIFI/WLan of the electronics on your end device (smartphone/tablet, name of the
network "ZORN ZFG"). Confirm this with the displayed password "ZORN1870".
4.3 Important for data transfer (WIFI/WLan and SD card)
• Make sure that your end divice (tablet, phone)
is not connected
to mobile data. If it is, deactivate this
connection.
• Make sure that you are connected to the WIFI/WLan "ZORNZFG".
• Check whether the SD card on the electronics can be read or whether measurement data are avai-
lable on it (via the "Mode" button on the electronics, go to the "Read card" > press "OK").
With this menu item, the max. 500 last measurements are loaded from the SD card
to your device (tablet, smartphone).
You can decide yourself how many measurements you actually want to load (see
"Download Limit" under 5.3 > Settings).
After clicking the button, all measurement data already read in are listed. A read-in
is displayed as a folder and sorted by date and time. It is also indicated how many
measurements are in the folder. Individual folders can be deleted if you press on
them for a longer time and by confirming the following note.
5.3 Settings
You can set the following properties individually according to your needs:
• Language (German, English)
• Unit (MN/m
2
, MPa)
• E
vd
decimal places (1 or 2)
• s/v decimal places (1 or 2)
• Download Limit (individually adjustable)
