What are these knobs for?
Gain:
With this knob you can adjust the overdrive gain of the treble of your instrument. It goes
from clean to very saturated.
Tone:
Allows to sofen the saturated sound and darken your sound. Turn clockwise to remove
trebles.
Mix:
allows to blend the two separate bands from the instrument. On the right there’s only the
treble band (with its gain and tone setngs), on the lef there’s the attack and the bass from the
instrument. It’s up to you to find the balance between these signals that suits you according to
your pickups level.
Volume:
This is the general volume of the pedal.
The Mid H/L/M switch:
Allows to choose the frequency which separates the bass band from the
treble band. The two bands are cross-dependents the bass bands ends where the treble band
begins. Three frequencies are availables 200Hz, 400Hz, 800Hz. The choixe of this setng has a
major importance for your sound. For example at 200Hz, the bass band will mainly be sub,
whereas at 800Hz there’s a lot of medium content in it.
And then, if you turn the pedal upside down, you’ll see a hole with two mini dip switches which
allows to change the color of the distorton by choosing between 3 clipping optonss
- Mosfets gives a dynamic saturaton with a little medium bump. (Of-On positon)
- Diode + Leds gives a more compressed distorton with less mediums. (On-Of or On-On positons)
- No clipperss has not yet been explored by the author of this user’s manual. You’ll get sound, you
might not like it, but maybe you will… (Of-Of positon)
