Important!
For stainless steel edges of the hob use the
cleaning agent for stainless steel.
The stainless steel edge of the plate can change
the colour as a result of the high temperature.
Troubleshooting
Problem
Possible cause
Remedy
You cannot activate the appliance
or operate it.
The appliance is not connected to
an electrical supply or it is connec-
ted incorrectly.
Check if the appliance is correctly
connected to the electrical supply.
Problem with the house electrical
system.
Examine the fuse in the electrical
system of the house in the fuse
box. If the fuses blow again and
again, speak to qualified electrician.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the customer service.
Give the data from the rating plate, three digit letter
code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on.
Make sure, you operated the appliance correctly. If not
the servicing by a customer service technician or dealer
will not be free of charge, also during the warranty peri-
od. The instructions about the customer service and
conditions of guarantee are in the guarantee booklet.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
MOD.
PROD.NO.
SER.NO
DATA
MOD.
PROD.NO.
SER.NO
DATA
MODEL
MODEL
MOD.
PROD.NO.
SER.NO.
03 IT
MADE IN ITALY
TYPE
230V-50Hz
IP20
0049
A
B
C
A) Stick it on Guarantee Card and send this part (if
applicable)
B) Stick it on Guarantee Card and keep this part (if
applicable)
C) Stick it on instruction booklet
Installation
Warning!
Refer to the Safety chapters.
Before the installation
14
