ZOpid-M8 User Manual
pg. 12
Reset Earbuds
In case Earbuds fail to connect with Cellphone, or there is no sound in left or right Earbud, follow these steps to
RESET the Earbuds:
1.
Take both Earbuds out of the case
2.
Make sure both the Earbuds are powered off (LEDs on the Earbuds are off)
3.
Press and hold the MFBs for about 5 seconds, as shown in the picture below:
4.
Don't release your fingers until the LEDs on both Earbuds flash Red and Blue alternatively
5.
Once the LED of both Earbuds flash Red & Blue, Immediately Double Press the MFB of Right (R) Earbud
6.
Both Earbuds will auto pair with each other after 3-5 seconds - the LED on one Earbud will flash blue
and the other Earbud will flash Red & Blue
7.
Delete the ZOpid-M8 from the list of paired devices on the wireless device (Cellphone, Tablet, Laptop
etc.)
8.
Once deleted, ZOpid-M8 will appear again under the available devices list, select ZOpid-M8 to
reconnect both Earbuds with that Wireless Device
9.
In case Earbuds fail to connect, put both Earbuds into charging case and repeat the above listed steps
Smart and Seamless Single Earbud or Both Earbuds Use
One of the features of these Earplugs is the automatic and seamless operation, switching from single Earbud
use to using both the Earbuds or vice versa. The following two scenarios will demonstrate this feature, and
assume that the Earplugs are already paired with the wireless device:
Scenario 1:
If user removes just one of the Earplugs from the Charging Case, that Earplug functions
independent of the other Earplug, and if the user later decides to use the Earplug that’s still in the Charging
case, both the Earplugs will function in Stereo Mode.
Scenario 2:
While listening to music or answering a phone call a user can remove any one of the earplugs and
put that Earplug back in the Charging Case, the other Earplugs will continue to function in Mono Mode - and if
at any time the user decides to reuse the Earplug that’s in the Charging Case, then both Earplugs will function
in Stereo Mode.
Summary of Contents for 2AORM-M8
Page 1: ......