ZEN32 WIRING DIAGRAMS FOR THE MOST COMMON 3-WAY INSTALLATIONS
For more diagrams or to request custom
instructions go to
support.getzooz.com
Wire and screw position, as well as color codes
are for illustration only. You should not follow the
colors and positioning in the illustration blindly.
Always identify all wires prior to installing Zooz
switches and make sure you can match the
diagrams to your set-up exactly. Don’t
experiment or attempt a “trial-and-error”
installation for your own safety.
Don’t disconnect
any wires before documenting your set-up in
each box with detailed images!
STOP!
NOTE!
If you are not comfortable identifying the wiring
and completing the installation, please consult a
licensed electrician.
Make sure you have identified all wiring correctly
before connecting the switch. If your wiring
doesn’t match any of the
below diagrams,
contact our support: [email protected]
ON/OFF SWITCHES ONLY
Do not connect Zooz Z-Wave switches to an
existing 3-way dimmer, illuminated switch, or
an electronic add-on switch.
Zooz switches can
only be wired with mechanical on/off or
momentary switches in a 3-way or 4-way setting!
To simplify the diagrams, we did not include
connections for the ground wire. Remember that
all Zooz switches need to be wired according to
the electrical code, with ground wire connected
to the ground terminal.
POWER OFF!
Cut power to the circuit before handling the
wiring.
Diagrams and instructions in this manual
are for the ZEN32 model ONLY! Always
follow the correct diagram for your own
safety and to avoid equipment damage.
Other Zooz switches may wire differently!
USE IT WITH SMART BULBS!
Want to control your smart bulb from a wall switch without cutting power to it every time you turn the light off from the switch?
We’ll tell you how, just ask!
NEED HELP?
If you’re having trouble reading the
diagrams or don’t see your wiring set-up
here, get in touch! We have
more 3-way,
4-way, and 5-way diagrams
and
instructions. There are many ways to wire
multi-point control set-ups so unless you
can match your wiring to the diagrams
here, please don’t attempt the installation
for your own safety.
[email protected]
www.support.getzooz.com
3-WAY DIAGRAM FOR 2-POINT CONTROL WITH ZEN32 AND REGULAR 3-WAY SWITCH: OPTION 1
ZEN32
3-WAY SWITCH
NEUTRAL
3-WAY DIAGRAM FOR 2-POINT CONTROL WITH ZEN32 AND REGULAR 3-WAY SWITCH: OPTION 2
ZEN32
3-WAY SWITCH
REWIRE BOTH BOXES!
REWIRE BOTH BOXES!
Here is a selection of settings available to customize your
switch:
Ÿ
LED Indicator
behavior, color, brightness:
Ÿ
Smart Bulb Mode
(disable the relay)
Ÿ
On/off status for the switch a er
power failure
Ÿ
Auto turn-on / turn-off timer
for the switch
Scan the QR code for a full list of parameters
and look
to the right for how to access them on your hub:
SmartThings
Hubitat
Vera
Choose your hub and scan the QR code with
your phone’s camera. Then click on the link to
learn how to access and change the advanced
settings for the switch on your hub.
Home Assistant
ZEN32 4-WAY INSTALLATION WIRING DIAGRAM (LINE AND LOAD MUST BE IN THE SAME BOX)
EACH BOX NEEDS TO BE WIRED
ACCORDING TO THE 4-WAY DIAGRAM.
Don’t follow the wire colors blindly - make sure you
understand the role of each wire before moving
forward with the installation. The colors used in this
diagram are just an example of the many scenarios
you’ll come across in multi-point control set-ups.
Follow this diagram ONLY if you confirmed you have
direct connection to power and light in the same
box. If they’re in separate boxes, ask us about using
the ZEN32 switch with ZAC99 momentary switches in
4-way and 5-way installations.
NEUTRAL
ZEN32
CHECK 3-WAY / 4-WAY TYPE!
Your 3-way and 4-way switches may have a different terminal
layout so identify the in and out terminals on the 4-way switch and
the common terminal on the 3-way switch before the installation.
LOOKING FOR ADVANCED SETTINGS? HERE THEY ARE!
SCAN SETTINGS
