Zoomlion ZRT850, Operator'S Manual

Page: 72 / 179

Co
nt
ro
ls
a
nd
ins
tru
m
ent
s
Operator’s Manual for Rough Terrain Crane
2. PARK BRAKE SWITCH – Set the switch to the “P” position when the crane is in the
correct position to operate.
Note:
If you park the crane on a slope, you must put the chocks before and behind the wheels.
3. HAZARD LIGHTS SWITCH – Push-in to set the hazard lights to ON. The indicator
illuminates (flashes).
4. CORNER MARKER LIGHTS / LOW BEAM LIGHTS SWITCH – Push the switch up, to
turn ON the corner marker lights. Push the switch down, illuminate the low beam lights.
5. WIPER CONTROL – Windshield wiper operation (4-speed settings: J – Timed Interval
(Intermittent), I – Low Speed, II – High Speed, O – OFF). Push the button, on the end of
the handle, to spray washer fluid onto the window. Push in the direction of the dash for the
left turn signal. Pull in the direction of the operator for the right turn signal. Refer to Figure
6-11.
Figure 6-11 Wiper Control
CAUTION
The spray of washer fluid stops after 15 seconds or if the washer fluid tank is empty. Do
not operate the wipers on hot sunny days unless you spray the window with wiper fluid.
When the temperature is below freezing, make sure that the wiper blades are not stuck
to the window before you set the wipers to ON.
6.2.5 BRAKE PEDAL
Push the brake pedal to decelerate or stop the crane.
High beam flasher
Right turn signal Left turn signal
Windshield wiper operation
Washer fluid button
Horn button
High beam
Windshield wiper operation
6-14 ZRT850 Rough Terrain Crane