Troubleshooting
Issue
Action Required
No visible LED status
Power On Device per section 3.2.
Blinking LED
Connect Device to Constant power source
when ignition key is removed. Ensure the
red wire is connected to 12V DC power
source. With a meter verify there is 12 volts
on the red wire. Ensure the USB cable is
plugged into ZB201 device. Device LED
will have Solid Amber or Green light when
proper power source has been installed.
Unable to acquire
GPS fix through Web
Portal
Move the vehicle to new location that does
not have obstacles directly overhead.
Unable to acquire
GPS fix through Web
Portal
Aftermarket window tinting may affect
reception of GPS signals. Move the device
to new mounting location.
13
zoombak.co.uk
