Zoombak ZB100, User Manual, Page: 10 / 18

Powering the Car Locator ON/ OFF
In order to power the Zoombak Car Locator on or off, follow these
simple instructions:
1. Power ON—Press and hold the Power Button until the Locator Status
LED Indicator begins to glow (approximately two seconds). Blinking
green indicates operation OK.
2. Power OFF—Press and hold the Power Button until the
Locator Status LED Indicator begins to flash quickly (approximately
two seconds). Locator Status LED Indicator will shut OFF when
the Locator has properly shut down. A key feature of your Zoombak
Car Locator during the power off process is that the Locator will
determine its current location and send a power off notification
via email and/or mobile text message with its current location
and time/date information (see the Zoombak Car Locator
Quick Start Guide for details on setting up your alerts). The Locator
Status LED Indicator will continue to blink during the power off
process, which may take up to 2 minutes to complete this important
notification feature.
Monitoring the Car Locator Status
Refer to the following list in order to determine the status of your
Zoombak Car Locator LED Indicator at any time.
BLINKING GREEN Indicates Power ON
BLINKING AMBER (YELLOW-ORANGE) Indicates Low Battery
GREEN Indicates Fully Charged (when Charging)
AMBER (YELLOW-ORANGE) Indicates Charging
NO COLOR Indicates Power OFF or Battery Needs to
be Charged
6
zoombak.co.uk