Riding and Operating the Stryder
1.
Turn on the scooter by pressing and holding ③ Power On/Off
for 3 seconds.
2.
Place one foot at the front of the deck and leave your other
foot on the ground.
3.
Lightly kick off with your foot on the ground and then gradually
press down on the right acceleration throttle with your thumb
to gain speed. The further you depress the throttle, the faster
the scooter will go.
4.
Once you have gained speed, you can place your other foot on
the rear of the deck (make sure not to step on the rear
mudguard!)
5.
To brake or slow down, press down gradually on the brake
throttle with your thumb. Exercise good judgement on your
braking distance and slow down beforehand.
6.
For emergency braking, step down on the rear mudguard. Only
use it under emergency situations as it will wear out the rear
wheel.
Mileage Shown
Switch between Trip (current trip distance) or Odo (lifetime distance
travelled) by pressing ② when the scooter is on.
To reset your current trip distance, hold down on ② for 5 seconds
when your mileage is in Trip mode. Odo cannot be reset.
Battery Life Indicator
The battery life shown on the display screen is only an estimate.
When riding uphill, you will notice that the battery life will drop
rapidly. This is normal due to the surge in current used.
The battery level should revert to normal level once you are back on
flat terrain.
Summary of Contents for Stryder
Page 1: ...QUICK START GUIDE...
Page 17: ......
