Zoom RhythmTrak RT-123, Operation Manual

Page: 54 / 72

The indication "Init" flashes on the display.
When initialization is carried out, all settings and data of the RT-123
are reset to the factory default condition, and then the unit starts
up. If the process was canceled, the unit starts up normally.
54
RT-123
Application
Examples
You can reset the RT-123 to the factory default condition. Use this function with care, because it will
erase all patterns and songs that have been recorded by the user.
Returning the RT-123 to the factory default condition (initialization)
STEP PATTERN(SONG REC)
MEASURE BEAT
II
REAL-TIME REC
Groove PLAY
MODE
TOM 3
6 QUANTIZE
TOM 2
4
TIME SIG
TOM 1
2
MIX
CRASH
8 BAR LENGTH
RIDE
10
SWING
EXTRA CYMBAL
12
SHIFT FUNCTION
INSERT/COPY DELETE/ERASE BASS MUTE BASS DRAM A DRAM B
STOP/EXIT PLAY
TEMPO
+ –
Percussion/SFX
General Drums
Techno Beat
Rap/HipHop
Modern Drums
Ballad Set
55-64
50-54
45-49
40-44
35-39
Epif Rock
Funk Trap
Standard Kit
Studio Drums
Live Rock
Basic Drum Kits
25-29
20-24
15-19
10-14
00-09
Bass
Programs
00-24
STEP REC
SONG PATTERN
2
1, 2
STEP
1
Turn power to the RT-123 on while holding the [REC] key down.
STEP
2
When wishing to go ahead with the initialization, press the [REC] key once more. To
cancel the procedure, press the [STOP/EXIT] key.
After initialization, all user patterns U01 - U99 will be blank.
NOTE
POWER
ON OFF
DC9V 300mA
STEP REC
STEP REC
STOP/EXIT