Zoom RFX-300 Operation Manual Download Page 9

ZOOM  RFX-300

9

Ef
fects

and

P

arameters

Microphone simulator 

When recording vocals or acoustic instruments with a dynamic microphone, this effect can be used to achieve
characteristics resembling those of a high-quality condenser mike. The simulator also provides limiter and enhancer
effects specially geared for microphone recording. Effects of this section are best for track recording in configurations
such as shown in the connection example "Recording (1) (Insert)" on page 4. 

[Setting Example] 

[Setting Example] 

VARIATION/TAP

TIME/ADJUST

MIX

BYPASS

A11

MIC SIMULATOR

VARIATION

(Vocal/Instrument)

This effect allows you to achieve condenser mike characteristics while 
using economical dynamic microphones. The available variations are 
"Vocal" with a full and well-rounded midrange and natural treble, and 
"Instrument" with the delicate sound of a condenser mike. 

Selects the variation (Vocal 
or Instrument). 

Threshold

Adjusts the limiter 
sensitivity. 

Enhance

Adjusts the high-range 
enhancer depth.

Dry Thru

In bypass mode, only 
the unprocessed original 
sound is output. 

This setting gives 
depth and impact to 
rock vocals. 

Suitable for recording the 
natural sound of an acoustic 
guitar. 

MIX

TIME

ADJUST

TAP

VARIATION

MIX

TIME

ADJUST

TAP

VARIATION

Effect

Description

[Setting Example] 

[Setting Example] 

VARIATION/TAP

TIME/ADJUST

MIX

A10

COMP/LIMITER

VARIATION

(Compressor/Limiter)

This effect processes the dynamic range of the sound, for keeping the signal 
level within a certain range. There are two variations: the compressor which 
raises signals below a certain threshold level and attenuates signals above a 
certain level, and the limiter which only attenuates signals above a certain level. 

Selects the effect 
variation (Compressor 
or Limiter). 

Release

Adjusts the time lag between the point 
where the signal falls below the threshold 
level and the end of compressor action. 
Should be short for single instruments 
and longer for ensembles. 

Threshold

Adjusts the threshold 
level where the 
compressor/limiter 
becomes active. 

Compressor with 
pronounced attack. 

Limiter for preventing 
sudden level changes. 

BYPASS

Dry Thru

In bypass mode, only 
the unprocessed original 
sound is output. 

MIX

TIME

ADJUST

TAP

VARIATION

MIX

TIME

ADJUST

TAP

VARIATION

Guitar & Organ 

Comprises a rotary effect that is essential for great organ sound, as well as a speaker cabinet simulator and other effects
suitable for electric guitar and organ. 

[Setting Example] 

BYPASS

Dry Thru

BYPASS

Dry Thru

B1

ROTARY

TAP

(Rate)

VARIATION/TAP

TIME/ADJUST

MIX

Simulates a rotary speaker turned by mechanical means. The rotation 
speed can be varied by tap input. 

Serves for tap input of 
rotation speed. 

Rate

Serves for knob 
adjustment of rotation 
speed. 

Intensity

Adjusts the depth of the 
effect sound.

VARIATION/TAP

TIME/ADJUST

MIX

B2

CABINET SIM

VARIATION

(Combo/Stack)

This effect adds a speaker cabinet character to the sound of an electric 
guitar that has been processed by distortion effects or a multi-effect 
device, resulting in realistic amplifier sound. The available variations are 
"Combo" (combo amplifier sound) and "Stack" (stack amplifier sound). 

Selects the effect variation 
(Combo or Stack). 

Presence

Adjusts the level of the 
ultra-high range.

This setting is optimized to produce a stack amplifier sound 
for a signal that has been processed by a distortion effect. 

Depth

Adjusts the depth of the 
cabinet effect. 

In bypass mode, only the 
unprocessed original sound 
is output. 

In bypass mode, only the 
unprocessed original sound 
is output. 

MIX

TIME

ADJUST

TAP

VARIATION

Effect

Description

Summary of Contents for RFX-300













Reviews: