4
2.5
LED Definitions
Indicator
Description
1
PWR
Power status
On: The ONU is power on
Off: The ONU is Power off
2
WIFI
WIFI
Blinking
：
Data is being transmitted
On
：
WIFI function Opens
3
LAN1-4
GE port status
On: Ethernet connection is normal
Blinking: Data is being transmitted through the
Ethernet port
Off: Ethernet connection is not set up
4
LOS
GPON optical signals
On: Optical power lower than receiver sensitivity;
Off: Optical in normal
5
PON
ONU Register
On: Success to register to OLT
Blinking: In process of registering to OLT
Off: Failed to register to OLT;
6
TEL
Telephone
port status
On
：
The connection between the TEL
port and the voice server has been set up
Blinking
：
The voice service of the TEL
port is established.
Off
：
The connection between the TEL
port and the voice server is not set up.
7
USB
USB port status
On: USB connection is normal.
Off: USB connection is not set up;
8
INT
Internet status
indicator
On: The routed WAN Internet access
service is normal.
Off: The routed WAN Internet access
service is abnormal.
9
OPT-DIG
Light intensity
indicator
On: higher than ONURX maximum
threshold.
flashing: lower than ONU
RX minimum
threshold;
off: ONU
RX is within the normal
threshold range.
2.6
Device Connection
-
Connect the fiber: Insert the SC fiber connector into the PON connector on the rear
panel of the ONU.
-
Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port
and each home device.
-
Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the
ONU 12V DC power jack.
