Zoom Power Drive PD-01 Operation Manual Download Page 1

Page: 1 / 16

ZOOM Power Drive PD-01

Operation Manual

I N D E X

Features--------------------------------------------------------------------------------------------------------------------------------2

Parts and Functions------------------------------------------------------------------------------------------------------4

Connections----------------------------------------------------------------------------------------------------------------------6

Sound Samples--------------------------------------------------------------------------------------------------------------8

PD-01 and Compact Effects---------------------------------------------------------------------------------10

PD-01 and Multi-Effects-------------------------------------------------------------------------------------------11

Troubleshooting------------------------------------------------------------------------------------------------------------12

Specifications-----------------------------------------------------------------------------------------------------------------14

Usage Precautions------------------------------------------------------------------------------------------------------15

Safety Precautions-------------------------------------------------------------------------------------------------------16

Summary of Contents for Power Drive PD-01
















