9
■
Setting noise reduction and recording file types
After setting the date/time and language, the noise reduction on/off and recording file type
settings screen opens.
Recording file settings
Off:: Only record podcast stereo files.
Original Data: In addition to podcast stereo files, also record the input signals of each
channel to separate files on the SD card at the same time.
With Tone & Comp: In addition to podcast stereo files, also record the input signals of
each channel after adjustment to separate files on the SD card at the same time.
Noise Reduction on/off setting
When multiple mics are being
used to record sound, the noise
reduction function of the
P8
suppresses background noise to
a constant level by automatically
reducing the levels of the mic
inputs not being used by people.
Tap when finished making
settings.
The noise reduction and recording file settings can be changed later by tapping
on the
Home Screen.
■
Connecting mics
INPUT SELECT switches 1–6
Set to when using a dynamic
mic or to
when using a
condenser mic. Gain will be set
suitably for the selection.
MUTE buttons 1–6
Confirm that these are not lit.
2: HOT
1: GND
3: COLD
ON AIR buttons 1–6
Confirm that these are lit.
Track buttons 1–6
Tap to adjust mic gain and audio
quality ( page 11).
Mic
Use a mic cable (with an XLR connector)
to connect to input jacks 1–6.
NOTE
When an INPUT SELECT switch is set to
, +48V phantom power is supplied to that input jack.
When connecting a device that is not compatible with phantom power, do not set the INPUT
SELECT switch to
. Doing so could damage the device.
