Zoom Multistomp MS-70CDR Firmware Update Manual Download Page 4

Page: 4 / 4

2.4

Click the [Execute] button to start the firmware update. The progress of the firmware
update appears as a bar like this.

Do not disconnect the USB cable while the firmware is being updated.

In the unlikely event that a firmware update should fail, follow the procedures from

step 2.1 to update the firmware again.

2.5

When the firmware update completes, it will appear as follows.

Click the [Exit] button to close the firmware update application. Then, turn the

MS-70CDR power off.

This completes the firmware update.

Summary of Contents for Multistomp MS-70CDR

Page 1: ...nly and are not intended to infringe on the copyrights of their respective owners The illustrations in these instructions might differ from actual screens Contents 1 Introduction 2 Precautions 2 2 Upd...

Page 2: ...o update the firmware for the MS 70CDR Precautions 1 Log in to your Mac computer using an account with administrator privileges 2 Before starting this application shut down all other applications that...

Page 3: ...B connector to the computer The FIRMWARE UPDATE screen appears 2 2 Double click the firmware update application icon to launch 2 3 With a MS 70CDR click the MIDI IN and MIDI OUT fields to open lists o...

Page 4: ...re is being updated In the unlikely event that a firmware update should fail follow the procedures from step 2 1 to update the firmware again 2 5 When the firmware update completes it will appear as f...