7
█
Reducing noise from wind and vocal pops
We recommend using a windscreen if air is blown di-
rectly at the mic, for example, when recording outdoors
or when the mic is near the mouth of a speaker.
Adjusting volume amplification on the display
Select the desired input for volume
amplification adjustment.
The M4 uses 32-bit float format, which can record with the same resolution for any volume level, so adjusting the
recording level is unnecessary. During playback, the top and bottom edges of the waveform screen are the highest
volume levels.
If the volume shown during recording is too small or too large, editing might be necessary for playback at a suitable
volume. For this reason, we recommend using
to adjust the volume display to a suitable size when re-
cording.
