Zoom H5 Operation Manual Download Page 23

Page: 23 / 116

ecording

Selecting inputs and adjusting lev

els

Handy Recorder

HINT

If a combo type input capsule is connected to the L/R
inputs, you can enable and disable the stereo link with
these tracks in the same manner by pressing the

track

button while pressing and holding

NOTE

When using MULTI FILE recording mode

• Files are created for each selected input as follows.

Track recorded

File name

Description

L/R input

ZOOMnnnn_TrLR.WAV Stereo file

Input 1

ZOOMnnnn_Tr1.WAV

Mono file

Input 2

ZOOMnnnn_Tr2.WAV

Mono file

Input 1/2

(stereo setting)

ZOOMnnnn_Tr12.WAV

Stereo file

Note: “nnnn” in the ﬁle name is the project number

• All the files that are created during the same recording

in MULTI FILE mode are managed as a single project
unit.

When using STEREO FILE recording mode

• Files are created for each selected input as follows.

ZOOMnnnn.WAV/ZOOMnnnn.MP3 (stereo file)

Note: “nnnn” in the ﬁle name is the ﬁle number

• In STEREO FILE mode, this data is managed in file units.

Turn

for the

selected input to adjust

the input level.

HINT

• Adjust so that the peak level stays around −12dB.
• If the sound distorts even when you lower the input

level, try changing mic positions and adjusting the
output levels of connected devices.

• The COMP/LIMITER function can be used. (

→

P. 94)

• Noise from wind and other sources can be cut during

recording. (

→

P. 93)

MULTI FILE mode

Summary of Contents for H5





















































































































Search results

Summary of Contents for H5

Reviews:

Brands by name

Popular brands

Zoom H5, Operation Manual

Search results

Summary of Contents for H5

Reviews:

Brands by name

Popular brands